Q.D.C.S Quick Die Change System

Because this lever-type clamp does not require a U-cut on the die shoe.it may be used in a wide range of applications. The base of the clamp is machined to fit the T-slot on the bolster.

The hydraulic DL DIE LIFTER withstands heavy load weights and abuse. The scrap guard/scrapers keep the roller surfaces free from scraps. The rollers are arrayed in closer pitches to prevent damage to the bottom of heavy dies. The height of the roller can be adjusted by removing some of the built-in shims with different thicknesses.

The bolster extenstion makes it easy to move the dues to an accessible area of the press for convenient die changing with a crane or forklift truck. Available in three different designs: detachable RC series, drop-down RD series(alternate model), and folding RE/RF series.

• Pump is driven by air and produces high hydraulic pressure.
• Pressure is adjusted by an air-adjusting valve. When pressure reachesmultiples of super charge, the air valve will stop operation.
• Hydraulic pressure will maintain for a long time even when there is apower failure or the air pressure disappears.
• Long-time hydraulic pressure lastin allows less power consumption;safe, economical andconvenient.
• With pressure on-and-off sensing functions.