Most of all the mold change system in injection molding machines & die costing machines are this way, FORWELL Q.M.C.S provides the movable clamper for mold changing to reduce machines down time and improve capacity. That makes the production management better capacities in productions and automation.

Pump Unit

Pump is driven by air and produces high hydraulic pressure.
Pressure is adjusted by an air-adjusting valve. When pressure reaches multiples of super charge, the air valve will stop operation.
Hydraulic pressure will maintain for a long time even when there is a power failure or the air pressure disappears.
Long-time hydraulic pressure last in allows less power consumption; safe, economical and convenient.
With pressure on-and-off sensing functions.
Measurement: L470 x W 180 x H 350(mm).

Die Clamp
	Because this lever-type clamp does not require a U-cut on the die shoe,it may be used in a wide range of applications. The base of the clamp is machined to fit the T-slot on the bolster. The flange-mount model clamp may be bolted onto the bolster. The automatic slidermodel makes remote control possible.

Control Box
	The control panel offers an interface to monitor and control operations of the quick mold change system. The upper half of the screen displays automatic functions while the lower half is used for operator-controlled functions.

FORWELL PRECISION MACHINERY CO., LTD.

No.399, Sec. 2, Mingsheng Rd., Pusin Township, Changhua County 513, Taiwan.
Tel: +886-4-8345196　　Fax: +886-4-8345197　　E-mail: forwell@forwell.com　　http://www.forwell.com　　