QUICK MOLD CHANGE SYSTEM-POWER UNITS OUTLINE DIMENSIONS

   
 
Patent Number: ZL 01 2 66203.8

BENEFITS OF FORWELL Q.D.C.S


SPECIFICATIONS  
-
  
-
FP 6308U-1-C
FP 6308U-2-2C
FP 6308U-3-2CD
FP 6308U-4-3CD / FP 1014U-4-3CD

FP63
Air pressure as 5kg output(unit:kg/cm2)
Pressure Ratio
06
420
1:84
07
300
1:60
08
250
1:50
09
200
1:40
10
150
1:30
12
100
1:20
14
80
1:16
16
50
1:10
20
40
1:8
24
26
1:5

Features

Pump is driven by air and produces high hydraulic pressure.

Pressure is adjusted by an air-adjusting valve. When pressure reachesmultiples of super charge, the air valve will stop operation.

Hydraulic pressure will maintain for a long time even when there is apower failure or the air pressure disappears.

Long-time hydraulic pressure lastin allows less power consumption;safe, economical andconvenient.

Measurement: L470 x W 180 x H 350(mm).

With pressure on-and-off sensing functions.
 
HYDRAULIC SCHEMATICS
Numer of Circuit
Circuits Code
System Configuration
1
C
666.gif (1041 bytes) One circuit tor clamping the upper die
One circuit for clamping the lower die
One circuit tor simultaneously clamping lhe upper and lowci dies
D
666.gif (1041 bytes) One circuit for the LIFTER
2
2C
666.gif (1041 bytes) One circuit lor upper die
One circuit for lower die
CD
666.gif (1041 bytes) One circuit for simultaneously clamping the upper and lower dies One circuit for the LIFTER
3
2CD
666.gif (1041 bytes) One circuit for simultaneously clamping the upper and lower dies One circuit for the LIFTER
4
3CD
666.gif (1041 bytes) Two circuit for clamping the upper die One circuit for clamping the lower die One circuit for the LIFTER
*Notice: Due to the continuing innovations, product dimensions subject to change without further notice.