The Core of The Power - Forwell Quick Die Change
Main Products

Quick Die Change System

Die Clamp, Die Lifting Carts - TX Die Clamp

TX Die Clamp

This compact, space saving, piston type clamp requires U-slots on the die shoe. The clamp leg is machined to fit the T-slot on the bolster. With the TX Die Clamp automatic slide model remote control is made possible.
 
Die Clamp, Die Lifting Carts - TX Die Clamp

Specifications

Model Unit TX-1 TX-2 TX-4 TX-6 TX-10 TX-16 TX-25
Clamping Farce(at 250kgf/cm2) tons 1 2 4 6.3 10 16 25
Full Stroke (X) mm 5 8 8 8 8 8 8
Clamping Stroke (Y) mm 2.5 4 3 3 3 3 3
Extra Stroke (Z) mm 2.5 4 5 5 5 5 5
Cylinder Capacity at Full Stroke cc 2.7 6.5 13 21 32 54 84
* Extra stroke is the difference between full stroke and clamping stroke with extra space allowed for safe operation.

Clamp Dimensions

Die Clamp, Die Lifting Carts - Clamp Dimensions
Model E F G H K
MIN.
PT
TX-1 38 37 14 35 11 8 1/8
TX-2 53 52.5 18 38 12 8 1/8
TX-4 68 61.5 23 59 15 10 1/4
TX-6 78 68 27 59 16 14 1/4
TX-10 98 71 38 79 16 17 1/4
TX-16 127 78.5 48 88 16 20 1/4
TX-25 148 100 58 98 15 23 1/4
* Die shoe thickness(h)Classify:25、30、35、40、45、50、55、60mm
* Before purchase, please verify mold edge thickness (h) and T-slot (A.B.C.D.) has standard or special dimensions.
 
 
Model A B C D Power Unit Models
TX-1 22 37 16 24 FP6308U-口-口
TX-2 22 37 16 24
TX-4 22 37 16 24
TX-6 28 48 20 28
TX-10 28 48 20 28 FP1014U-口-口
TX-16 28 48 23 28
TX-25 36 56 25 28
* Die shoe thickness(h)Classify:25、30、35、40、45、50、55、60mm
* Before purchase, please verify mold edge thickness (h) and T-slot (A.B.C.D.) has standard or special dimensions.

 

 

Press Machine | Injection Molding | Hydraulic Pumps