Home Products

Additional Products

TX Die Clamp

This compact, space saving, piston type clamp requires U-slots on the die shoe. The clamp leg is machined to fit the T-slot on the bolster. With the TX Die Clamp automatic slide model remote control is made possible.

TX DIE CLAMP
Specifications

 

Model Unit TX-1 TX-2 TX-4 TX-6 TX-10 TX-16 TX-25
Clamping Farce(at 250kgf/cm2) tons 1 2 4 6.3 10 16 25
Full Stroke (X) mm 5 8 8 8 8 8 8
Clamping Stroke (Y) mm 2.5 4 3 3 3 3 3
Extra Stroke (Z) mm 2.5 4 5 5 5 5 5
Cylinder Capacity at Full Stroke cc 2.7 6.5 13 21 32 54 84

Extra stroke is the difference between full stroke and clamping stroke with extra space allowed for safe operation.

Clamp Dimensions

 

TX DIE CLAMP
Model E F G H K MIN. PT
TX-1 38 37 14 35 11 8 1/8
TX-2 53 52.5 18 38 12 8 1/8
TX-4 68 61.5 23 59 15 10 1/4
TX-6 78 68 27 59 16 14 1/4
TX-10 98 71 38 79 16 17 1/4
TX-16 127 78.5 48 88 16 20 1/4
TX-25 148 100 58 98 15 23 1/4

Die shoe thickness(h)Classify:25、30、35、40、45、50、55、60mm.

Before purchase, please verify mold edge thickness (h) and T-slot (A.B.C.D.) has standard or special dimensions.

Model A B C D Power Unit Models
TX-1 22 37 16 24 FP6308U-口-口
TX-2 22 37 16 24
TX-4 22 37 16 24
TX-6 28 48 20 28
TX-10 28 48 20 28 FP1014U-口-口
TX-16 28 48 23 28
TX-25 36 56 25  

Die shoe thickness(h)Classify:25、30、35、40、45、50、55、60mm.

Before purchase, please verify mold edge thickness (h) and T-slot (A.B.C.D.) has standard or special dimensions.